dmesg - AMD Ryzen 7 1700X Eight-Core
Linux version 5.8.13-200.fc32.x86_64 (mockbuild@bkernel01.iad2.fedoraproject.org) (gcc (GCC) 10.2.1 20200723 (Red Hat 10.2.1-1), GNU ld version 2.34-4.fc32) #1 SMP Thu Oct 1 21:49:42 UTC 2020
Command line: BOOT_IMAGE=(hd3,gpt2)/vmlinuz-5.8.13-200.fc32.x86_64 root=/dev/mapper/fedora_localhost--live-root ro resume=/dev/mapper/fedora_localhost--live-swap rd.lvm.lv=fedora_localhost-live/root rd.lvm.lv=fedora_localhost-live/swap rhgb quiet rd.driver.blacklist=nouveau modprobe.blacklist=nouveau nvidia-drm.modeset=1
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000009d81fff] usable
BIOS-e820: [mem 0x0000000009d82000-0x0000000009ffffff] reserved
BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
BIOS-e820: [mem 0x000000000a200000-0x000000000a20afff] ACPI NVS
BIOS-e820: [mem 0x000000000a20b000-0x000000000affffff] usable
BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
BIOS-e820: [mem 0x000000000b020000-0x00000000db537fff] usable
BIOS-e820: [mem 0x00000000db538000-0x00000000db6a7fff] reserved
BIOS-e820: [mem 0x00000000db6a8000-0x00000000dbb29fff] usable
BIOS-e820: [mem 0x00000000dbb2a000-0x00000000dbc40fff] ACPI NVS
BIOS-e820: [mem 0x00000000dbc41000-0x00000000dcb25fff] reserved
BIOS-e820: [mem 0x00000000dcb26000-0x00000000deffffff] usable
BIOS-e820: [mem 0x00000000df000000-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fd000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000041f37ffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0xd76b9018-0xd76c7057] usable ==> usable
e820: update [mem 0xd76b9018-0xd76c7057] usable ==> usable
e820: update [mem 0xd7699018-0xd76b8a57] usable ==> usable
e820: update [mem 0xd7699018-0xd76b8a57] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x0000000009d81fff] usable
reserve setup_data: [mem 0x0000000009d82000-0x0000000009ffffff] reserved
reserve setup_data: [mem 0x000000000a000000-0x000000000a1fffff] usable
reserve setup_data: [mem 0x000000000a200000-0x000000000a20afff] ACPI NVS
reserve setup_data: [mem 0x000000000a20b000-0x000000000affffff] usable
reserve setup_data: [mem 0x000000000b000000-0x000000000b01ffff] reserved
reserve setup_data: [mem 0x000000000b020000-0x00000000d7699017] usable
reserve setup_data: [mem 0x00000000d7699018-0x00000000d76b8a57] usable
reserve setup_data: [mem 0x00000000d76b8a58-0x00000000d76b9017] usable
reserve setup_data: [mem 0x00000000d76b9018-0x00000000d76c7057] usable
reserve setup_data: [mem 0x00000000d76c7058-0x00000000db537fff] usable
reserve setup_data: [mem 0x00000000db538000-0x00000000db6a7fff] reserved
reserve setup_data: [mem 0x00000000db6a8000-0x00000000dbb29fff] usable
reserve setup_data: [mem 0x00000000dbb2a000-0x00000000dbc40fff] ACPI NVS
reserve setup_data: [mem 0x00000000dbc41000-0x00000000dcb25fff] reserved
reserve setup_data: [mem 0x00000000dcb26000-0x00000000deffffff] usable
reserve setup_data: [mem 0x00000000df000000-0x00000000dfffffff] reserved
reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
reserve setup_data: [mem 0x00000000fd000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000041f37ffff] usable
efi: EFI v2.70 by American Megatrends
efi: ACPI 2.0=0xdbbbd000 ACPI=0xdbbbd000 SMBIOS=0xdc96a000 MEMATTR=0xd8ac1318 ESRT=0xd780df98 RNG=0xdc984d98
efi: seeding entropy pool
secureboot: Secure boot disabled
SMBIOS 2.8 present.
DMI: Micro-Star International Co., Ltd. MS-7B79/X470 GAMING PLUS MAX (MS-7B79), BIOS H.60 06/11/2020
tsc: Fast TSC calibration failed
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x41f380 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFE0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000420000000 aka 16896M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
last_pfn = 0xdf000 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x00000000d780df98 to 0x00000000d780dfd0.
e820: update [mem 0xd780d000-0xd780dfff] usable ==> reserved
Using GB pages for direct mapping
secureboot: Secure boot disabled
RAMDISK: [mem 0x5ae23000-0x5cd7afff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000DBBBD000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000DBBBD0A0 0000BC (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000DBBC4A48 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000DBBBD1F0 007853 (v02 ALASKA A M I 01072009 INTL 20120913)
ACPI: FACS 0x00000000DBC29E00 000040
ACPI: APIC 0x00000000DBBC4B60 00015E (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000DBBC4CC0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x00000000DBBC4D08 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000DBBC4DA8 0000FC (v02 ALASKA CPUSSDT 01072009 AMI 01072009)
ACPI: SSDT 0x00000000DBBC4EA8 008C98 (v02 AMD AMD ALIB 00000002 MSFT 04000000)
ACPI: SSDT 0x00000000DBBCDB40 003776 (v01 AMD AMD AOD 00000001 INTL 20120913)
ACPI: MCFG 0x00000000DBBD12B8 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: HPET 0x00000000DBBD12F8 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: SSDT 0x00000000DBBD1330 000024 (v01 AMDFCH FCHZP 00001000 INTL 20120913)
ACPI: UEFI 0x00000000DBBD1358 000042 (v01 ALASKA A M I 00000002 01000013)
ACPI: IVRS 0x00000000DBBD13A0 0000D0 (v02 AMD AMD IVRS 00000001 AMD 00000000)
ACPI: SSDT 0x00000000DBBD1470 002314 (v01 AMD AMD CPU 00000001 AMD 00000001)
ACPI: CRAT 0x00000000DBBD3788 000F50 (v01 AMD AMD CRAT 00000001 AMD 00000001)
ACPI: CDIT 0x00000000DBBD46D8 000029 (v01 AMD AMD CDIT 00000001 AMD 00000001)
ACPI: BGRT 0x00000000DBBD4708 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000DBBD4740 001D4A (v01 AMD AmdTable 00000001 INTL 20120913)
ACPI: SSDT 0x00000000DBBD6490 0000BF (v01 AMD AMD PT 00001000 INTL 20120913)
ACPI: WSMT 0x00000000DBBD6550 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
system APIC only can use physical flat
Setting APIC routing to physical flat.
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000041f37ffff]
NODE_DATA(0) allocated [mem 0x41f355000-0x41f37ffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000041f37ffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x0000000009d81fff]
node 0: [mem 0x000000000a000000-0x000000000a1fffff]
node 0: [mem 0x000000000a20b000-0x000000000affffff]
node 0: [mem 0x000000000b020000-0x00000000db537fff]
node 0: [mem 0x00000000db6a8000-0x00000000dbb29fff]
node 0: [mem 0x00000000dcb26000-0x00000000deffffff]
node 0: [mem 0x0000000100000000-0x000000041f37ffff]
Zeroed struct page in unavailable ranges: 12534 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000041f37ffff]
On node 0 totalpages: 4181770
DMA zone: 64 pages used for memmap
DMA zone: 26 pages reserved
DMA zone: 3999 pages, LIFO batch:0
DMA32 zone: 14128 pages used for memmap
DMA32 zone: 904171 pages, LIFO batch:63
Normal zone: 51150 pages used for memmap
Normal zone: 3273600 pages, LIFO batch:63
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
system APIC only can use physical flat
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 17, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 18, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228201 base: 0xfed00000
e820: update [mem 0xd7783000-0xd77dffff] usable ==> reserved
smpboot: Allowing 32 CPUs, 16 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0x09d82000-0x09ffffff]
PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a20afff]
PM: hibernation: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
PM: hibernation: Registered nosave memory: [mem 0xd7699000-0xd7699fff]
PM: hibernation: Registered nosave memory: [mem 0xd76b8000-0xd76b8fff]
PM: hibernation: Registered nosave memory: [mem 0xd76b9000-0xd76b9fff]
PM: hibernation: Registered nosave memory: [mem 0xd76c7000-0xd76c7fff]
PM: hibernation: Registered nosave memory: [mem 0xd7783000-0xd77dffff]
PM: hibernation: Registered nosave memory: [mem 0xd780d000-0xd780dfff]
PM: hibernation: Registered nosave memory: [mem 0xdb538000-0xdb6a7fff]
PM: hibernation: Registered nosave memory: [mem 0xdbb2a000-0xdbc40fff]
PM: hibernation: Registered nosave memory: [mem 0xdbc41000-0xdcb25fff]
PM: hibernation: Registered nosave memory: [mem 0xdf000000-0xdfffffff]
PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfcffffff]
PM: hibernation: Registered nosave memory: [mem 0xfd000000-0xffffffff]
[mem 0xe0000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1
percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144
pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31
Built 1 zonelists, mobility grouping on. Total pages: 4116402
Policy zone: Normal
Kernel command line: BOOT_IMAGE=(hd3,gpt2)/vmlinuz-5.8.13-200.fc32.x86_64 root=/dev/mapper/fedora_localhost--live-root ro resume=/dev/mapper/fedora_localhost--live-swap rd.lvm.lv=fedora_localhost-live/root rd.lvm.lv=fedora_localhost-live/swap rhgb quiet rd.driver.blacklist=nouveau modprobe.blacklist=nouveau nvidia-drm.modeset=1
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
mem auto-init: stack:off, heap alloc:off, heap free:off
Memory: 16196500K/16727080K available (14339K kernel code, 2492K rwdata, 8624K rodata, 2504K init, 4648K bss, 530580K reserved, 0K cma-reserved)
random: get_random_u64 called from __kmem_cache_create+0x3e/0x610 with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
ftrace: allocating 43501 entries in 170 pages
ftrace: allocated 170 pages with 4 groups
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=32.
Trampoline variant of Tasks RCU enabled.
Rude variant of Tasks RCU enabled.
Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
NR_IRQS: 524544, nr_irqs: 1224, preallocated irqs: 16
random: crng done (trusting CPU's manufacturer)
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20200528
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
APIC: Switch to symmetric I/O mode setup
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
tsc: PIT calibration matches HPET. 1 loops
tsc: Detected 3399.590 MHz processor
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3100cbc6df6, max_idle_ns: 440795328704 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 6799.18 BogoMIPS (lpj=3399590)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
SELinux: Initializing.
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
LVT offset 1 assigned for vector 0xf9
LVT offset 2 assigned for vector 0xf4
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full AMD retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Vulnerable
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
Freeing SMP alternatives memory: 40K
smpboot: CPU0: AMD Ryzen 7 1700X Eight-Core Processor (family: 0x17, model: 0x1, stepping: 0x1)
Performance Events: Fam17h+ core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15
smp: Brought up 1 node, 16 CPUs
smpboot: Max logical packages: 2
smpboot: Total of 16 processors activated (108786.88 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20afff] (45056 bytes)
PM: Registering ACPI NVS region [mem 0xdbb2a000-0xdbc40fff] (1142784 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 8192 (order: 7, 524288 bytes, linear)
xor: automatically using best checksumming function avx
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 08:30:49, date: 2020-10-08
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
NET: Registered protocol family 16
DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1602145849.140:1): state=initialized audit_enabled=0 res=1
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
cryptd: max_cpu_qlen set to 1000
alg: No test for 842 (842-generic)
alg: No test for 842 (842-scomp)
raid6: skip pq benchmark and using algorithm avx2x4
raid6: using avx2x2 recovery algorithm
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 8 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 2 GPEs in block 00 to 1F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PME LTR DPC]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug AER PCIeCapability]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:1450] type 00 class 0x060000
pci 0000:00:00.2: [1022:1451] type 00 class 0x080600
pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
pci 0000:00:01.1: [1022:1453] type 01 class 0x060400
pci 0000:00:01.1: enabling Extended Tags
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.3: [1022:1453] type 01 class 0x060400
pci 0000:00:01.3: enabling Extended Tags
pci 0000:00:01.3: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [1022:1452] type 00 class 0x060000
pci 0000:00:03.0: [1022:1452] type 00 class 0x060000
pci 0000:00:03.1: [1022:1453] type 01 class 0x060400
pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [1022:1452] type 00 class 0x060000
pci 0000:00:07.0: [1022:1452] type 00 class 0x060000
pci 0000:00:07.1: [1022:1454] type 01 class 0x060400
pci 0000:00:07.1: enabling Extended Tags
pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
pci 0000:00:08.1: [1022:1454] type 01 class 0x060400
pci 0000:00:08.1: enabling Extended Tags
pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
pci 0000:00:18.0: [1022:1460] type 00 class 0x060000
pci 0000:00:18.1: [1022:1461] type 00 class 0x060000
pci 0000:00:18.2: [1022:1462] type 00 class 0x060000
pci 0000:00:18.3: [1022:1463] type 00 class 0x060000
pci 0000:00:18.4: [1022:1464] type 00 class 0x060000
pci 0000:00:18.5: [1022:1465] type 00 class 0x060000
pci 0000:00:18.6: [1022:1466] type 00 class 0x060000
pci 0000:00:18.7: [1022:1467] type 00 class 0x060000
pci 0000:01:00.0: [144d:a808] type 00 class 0x010802
pci 0000:01:00.0: reg 0x10: [mem 0xf7900000-0xf7903fff 64bit]
pci 0000:00:01.1: PCI bridge to [bus 01]
pci 0000:00:01.1: bridge window [mem 0xf7900000-0xf79fffff]
pci 0000:03:00.0: [1022:43d0] type 00 class 0x0c0330
pci 0000:03:00.0: reg 0x10: [mem 0xf77a0000-0xf77a7fff 64bit]
pci 0000:03:00.0: enabling Extended Tags
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:03:00.1: [1022:43c8] type 00 class 0x010601
pci 0000:03:00.1: reg 0x24: [mem 0xf7780000-0xf779ffff]
pci 0000:03:00.1: reg 0x30: [mem 0xf7700000-0xf777ffff pref]
pci 0000:03:00.1: enabling Extended Tags
pci 0000:03:00.1: PME# supported from D3hot D3cold
pci 0000:03:00.2: [1022:43c6] type 01 class 0x060400
pci 0000:03:00.2: enabling Extended Tags
pci 0000:03:00.2: PME# supported from D3hot D3cold
pci 0000:00:01.3: PCI bridge to [bus 03-26]
pci 0000:00:01.3: bridge window [io 0xf000-0xffff]
pci 0000:00:01.3: bridge window [mem 0xf7500000-0xf77fffff]
pci 0000:20:00.0: [1022:43c7] type 01 class 0x060400
pci 0000:20:00.0: enabling Extended Tags
pci 0000:20:00.0: PME# supported from D3hot D3cold
pci 0000:20:01.0: [1022:43c7] type 01 class 0x060400
pci 0000:20:01.0: enabling Extended Tags
pci 0000:20:01.0: PME# supported from D3hot D3cold
pci 0000:20:02.0: [1022:43c7] type 01 class 0x060400
pci 0000:20:02.0: enabling Extended Tags
pci 0000:20:02.0: PME# supported from D3hot D3cold
pci 0000:20:03.0: [1022:43c7] type 01 class 0x060400
pci 0000:20:03.0: enabling Extended Tags
pci 0000:20:03.0: PME# supported from D3hot D3cold
pci 0000:20:04.0: [1022:43c7] type 01 class 0x060400
pci 0000:20:04.0: enabling Extended Tags
pci 0000:20:04.0: PME# supported from D3hot D3cold
pci 0000:20:08.0: [1022:43c7] type 01 class 0x060400
pci 0000:20:08.0: enabling Extended Tags
pci 0000:20:08.0: PME# supported from D3hot D3cold
pci 0000:03:00.2: PCI bridge to [bus 20-26]
pci 0000:03:00.2: bridge window [io 0xf000-0xffff]
pci 0000:03:00.2: bridge window [mem 0xf7500000-0xf76fffff]
pci 0000:20:00.0: PCI bridge to [bus 21]
pci 0000:22:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:22:00.0: reg 0x10: [io 0xf000-0xf0ff]
pci 0000:22:00.0: reg 0x18: [mem 0xf7604000-0xf7604fff 64bit]
pci 0000:22:00.0: reg 0x20: [mem 0xf7600000-0xf7603fff 64bit]
pci 0000:22:00.0: supports D1 D2
pci 0000:22:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:20:01.0: PCI bridge to [bus 22]
pci 0000:20:01.0: bridge window [io 0xf000-0xffff]
pci 0000:20:01.0: bridge window [mem 0xf7600000-0xf76fffff]
pci 0000:20:02.0: PCI bridge to [bus 23]
pci 0000:20:03.0: PCI bridge to [bus 24]
pci 0000:20:04.0: PCI bridge to [bus 25]
pci 0000:26:00.0: [1b21:1242] type 00 class 0x0c0330
pci 0000:26:00.0: reg 0x10: [mem 0xf7500000-0xf7507fff 64bit]
pci 0000:26:00.0: enabling Extended Tags
pci 0000:26:00.0: PME# supported from D3hot D3cold
pci 0000:20:08.0: PCI bridge to [bus 26]
pci 0000:20:08.0: bridge window [mem 0xf7500000-0xf75fffff]
pci 0000:27:00.0: [10de:1004] type 00 class 0x030000
pci 0000:27:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
pci 0000:27:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref]
pci 0000:27:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:27:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:27:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
pci 0000:27:00.0: BAR 1: assigned to efifb
pci 0000:27:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:03.1 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link)
pci 0000:27:00.1: [10de:0e1a] type 00 class 0x040300
pci 0000:27:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
pci 0000:00:03.1: ASPM: current common clock configuration is inconsistent, reconfiguring
pci 0000:00:03.1: PCI bridge to [bus 27]
pci 0000:00:03.1: bridge window [io 0xe000-0xefff]
pci 0000:00:03.1: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:03.1: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
pci 0000:28:00.0: [1022:145a] type 00 class 0x130000
pci 0000:28:00.0: enabling Extended Tags
pci 0000:28:00.2: [1022:1456] type 00 class 0x108000
pci 0000:28:00.2: reg 0x18: [mem 0xf7300000-0xf73fffff]
pci 0000:28:00.2: reg 0x24: [mem 0xf7400000-0xf7401fff]
pci 0000:28:00.2: enabling Extended Tags
pci 0000:28:00.3: [1022:145c] type 00 class 0x0c0330
pci 0000:28:00.3: reg 0x10: [mem 0xf7200000-0xf72fffff 64bit]
pci 0000:28:00.3: enabling Extended Tags
pci 0000:28:00.3: PME# supported from D0 D3hot D3cold
pci 0000:00:07.1: PCI bridge to [bus 28]
pci 0000:00:07.1: bridge window [mem 0xf7200000-0xf74fffff]
pci 0000:29:00.0: [1022:1455] type 00 class 0x130000
pci 0000:29:00.0: enabling Extended Tags
pci 0000:29:00.2: [1022:7901] type 00 class 0x010601
pci 0000:29:00.2: reg 0x24: [mem 0xf7808000-0xf7808fff]
pci 0000:29:00.2: enabling Extended Tags
pci 0000:29:00.2: PME# supported from D3hot D3cold
pci 0000:29:00.3: [1022:1457] type 00 class 0x040300
pci 0000:29:00.3: reg 0x10: [mem 0xf7800000-0xf7807fff]
pci 0000:29:00.3: enabling Extended Tags
pci 0000:29:00.3: PME# supported from D0 D3hot D3cold
pci 0000:00:08.1: PCI bridge to [bus 29]
pci 0000:00:08.1: bridge window [mem 0xf7800000-0xf78fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
iommu: Default domain type: Translated
pci 0000:27:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
pci 0000:27:00.0: vgaarb: bridge control possible
pci 0000:27:00.0: vgaarb: setting as boot device
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x09d82000-0x0bffffff]
e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
e820: reserve RAM buffer [mem 0xd7699018-0xd7ffffff]
e820: reserve RAM buffer [mem 0xd76b9018-0xd7ffffff]
e820: reserve RAM buffer [mem 0xd7783000-0xd7ffffff]
e820: reserve RAM buffer [mem 0xd780d000-0xd7ffffff]
e820: reserve RAM buffer [mem 0xdb538000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdbb2a000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
e820: reserve RAM buffer [mem 0x41f380000-0x41fffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io 0x0a00-0x0a0f] has been reserved
system 00:02: [io 0x0a10-0x0a1f] has been reserved
system 00:02: [io 0x0a20-0x0a2f] has been reserved
system 00:02: [io 0x0a40-0x0a4f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io 0x04d0-0x04d1] has been reserved
system 00:03: [io 0x040b] has been reserved
system 00:03: [io 0x04d6] has been reserved
system 00:03: [io 0x0c00-0x0c01] has been reserved
system 00:03: [io 0x0c14] has been reserved
system 00:03: [io 0x0c50-0x0c51] has been reserved
system 00:03: [io 0x0c52] has been reserved
system 00:03: [io 0x0c6c] has been reserved
system 00:03: [io 0x0c6f] has been reserved
system 00:03: [io 0x0cd0-0x0cd1] has been reserved
system 00:03: [io 0x0cd2-0x0cd3] has been reserved
system 00:03: [io 0x0cd4-0x0cd5] has been reserved
system 00:03: [io 0x0cd6-0x0cd7] has been reserved
system 00:03: [io 0x0cd8-0x0cdf] has been reserved
system 00:03: [io 0x0800-0x089f] has been reserved
system 00:03: [io 0x0b00-0x0b0f] has been reserved
system 00:03: [io 0x0b20-0x0b3f] has been reserved
system 00:03: [io 0x0900-0x090f] has been reserved
system 00:03: [io 0x0910-0x091f] has been reserved
system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:03: [mem 0xfec01000-0xfec01fff] could not be reserved
system 00:03: [mem 0xfedc0000-0xfedc0fff] has been reserved
system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:03: [mem 0xfed80000-0xfed8ffff] could not be reserved
system 00:03: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:03: [mem 0xff000000-0xffffffff] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 4 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:00:01.1: PCI bridge to [bus 01]
pci 0000:00:01.1: bridge window [mem 0xf7900000-0xf79fffff]
pci 0000:20:00.0: PCI bridge to [bus 21]
pci 0000:20:01.0: PCI bridge to [bus 22]
pci 0000:20:01.0: bridge window [io 0xf000-0xffff]
pci 0000:20:01.0: bridge window [mem 0xf7600000-0xf76fffff]
pci 0000:20:02.0: PCI bridge to [bus 23]
pci 0000:20:03.0: PCI bridge to [bus 24]
pci 0000:20:04.0: PCI bridge to [bus 25]
pci 0000:20:08.0: PCI bridge to [bus 26]
pci 0000:20:08.0: bridge window [mem 0xf7500000-0xf75fffff]
pci 0000:03:00.2: PCI bridge to [bus 20-26]
pci 0000:03:00.2: bridge window [io 0xf000-0xffff]
pci 0000:03:00.2: bridge window [mem 0xf7500000-0xf76fffff]
pci 0000:00:01.3: PCI bridge to [bus 03-26]
pci 0000:00:01.3: bridge window [io 0xf000-0xffff]
pci 0000:00:01.3: bridge window [mem 0xf7500000-0xf77fffff]
pci 0000:00:03.1: PCI bridge to [bus 27]
pci 0000:00:03.1: bridge window [io 0xe000-0xefff]
pci 0000:00:03.1: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:03.1: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
pci 0000:00:07.1: PCI bridge to [bus 28]
pci 0000:00:07.1: bridge window [mem 0xf7200000-0xf74fffff]
pci 0000:00:08.1: PCI bridge to [bus 29]
pci 0000:00:08.1: bridge window [mem 0xf7800000-0xf78fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xe0000000-0xf7ffffff window]
pci_bus 0000:01: resource 1 [mem 0xf7900000-0xf79fffff]
pci_bus 0000:03: resource 0 [io 0xf000-0xffff]
pci_bus 0000:03: resource 1 [mem 0xf7500000-0xf77fffff]
pci_bus 0000:20: resource 0 [io 0xf000-0xffff]
pci_bus 0000:20: resource 1 [mem 0xf7500000-0xf76fffff]
pci_bus 0000:22: resource 0 [io 0xf000-0xffff]
pci_bus 0000:22: resource 1 [mem 0xf7600000-0xf76fffff]
pci_bus 0000:26: resource 1 [mem 0xf7500000-0xf75fffff]
pci_bus 0000:27: resource 0 [io 0xe000-0xefff]
pci_bus 0000:27: resource 1 [mem 0xf6000000-0xf70fffff]
pci_bus 0000:27: resource 2 [mem 0xe8000000-0xf1ffffff 64bit pref]
pci_bus 0000:28: resource 1 [mem 0xf7200000-0xf74fffff]
pci_bus 0000:29: resource 1 [mem 0xf7800000-0xf78fffff]
pci 0000:27:00.1: D0 power state depends on 0000:27:00.0
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 32096K
pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
pci 0000:00:01.0: Adding to iommu group 0
pci 0000:00:01.1: Adding to iommu group 1
pci 0000:00:01.3: Adding to iommu group 2
pci 0000:00:02.0: Adding to iommu group 3
pci 0000:00:03.0: Adding to iommu group 4
pci 0000:00:03.1: Adding to iommu group 5
pci 0000:00:04.0: Adding to iommu group 6
pci 0000:00:07.0: Adding to iommu group 7
pci 0000:00:07.1: Adding to iommu group 8
pci 0000:00:08.0: Adding to iommu group 9
pci 0000:00:08.1: Adding to iommu group 10
pci 0000:00:14.0: Adding to iommu group 11
pci 0000:00:14.3: Adding to iommu group 11
pci 0000:00:18.0: Adding to iommu group 12
pci 0000:00:18.1: Adding to iommu group 12
pci 0000:00:18.2: Adding to iommu group 12
pci 0000:00:18.3: Adding to iommu group 12
pci 0000:00:18.4: Adding to iommu group 12
pci 0000:00:18.5: Adding to iommu group 12
pci 0000:00:18.6: Adding to iommu group 12
pci 0000:00:18.7: Adding to iommu group 12
pci 0000:01:00.0: Adding to iommu group 13
pci 0000:03:00.0: Adding to iommu group 14
pci 0000:03:00.1: Adding to iommu group 14
pci 0000:03:00.2: Adding to iommu group 14
pci 0000:20:00.0: Adding to iommu group 14
pci 0000:20:01.0: Adding to iommu group 14
pci 0000:20:02.0: Adding to iommu group 14
pci 0000:20:03.0: Adding to iommu group 14
pci 0000:20:04.0: Adding to iommu group 14
pci 0000:20:08.0: Adding to iommu group 14
pci 0000:22:00.0: Adding to iommu group 14
pci 0000:26:00.0: Adding to iommu group 14
pci 0000:27:00.0: Adding to iommu group 15
pci 0000:27:00.1: Adding to iommu group 15
pci 0000:28:00.0: Adding to iommu group 16
pci 0000:28:00.2: Adding to iommu group 17
pci 0000:28:00.3: Adding to iommu group 18
pci 0000:29:00.0: Adding to iommu group 19
pci 0000:29:00.2: Adding to iommu group 20
pci 0000:29:00.3: Adding to iommu group 21
pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
pci 0000:00:00.2: AMD-Vi: Extended features (0xf77ef22294ada):
PPR NX GT IA GA PC GA_vAPIC
AMD-Vi: Interrupt remapping enabled
AMD-Vi: Virtual APIC enabled
AMD-Vi: Lazy IO/TLB flushing enabled
amd_uncore: AMD NB counters detected
amd_uncore: AMD LLC counters detected
perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=22 bucket_order=0
zbud: loaded
integrity: Platform Keyring initialized
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
atomic64_test: passed for x86-64 platform with CX8 and with SSE
pcieport 0000:00:01.1: AER: enabled with IRQ 28
pcieport 0000:00:01.3: AER: enabled with IRQ 29
pcieport 0000:00:03.1: AER: enabled with IRQ 30
pcieport 0000:00:07.1: AER: enabled with IRQ 31
pcieport 0000:00:08.1: AER: enabled with IRQ 32
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
efifb: probing for efifb
efifb: showing boot graphics
efifb: framebuffer at 0xe8000000, using 8640k, total 8640k
efifb: mode is 1920x1080x32, linelength=8192, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
fbcon: Deferring console take-over
fb0: EFI VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
ACPI: \_PR_.C000: Found 2 idle states
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
ACPI: \_PR_.C002: Found 2 idle states
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
ACPI: \_PR_.C004: Found 2 idle states
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
ACPI: \_PR_.C006: Found 2 idle states
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
ACPI: \_PR_.C008: Found 2 idle states
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
ACPI: \_PR_.C00A: Found 2 idle states
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
ACPI: \_PR_.C00C: Found 2 idle states
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
ACPI: \_PR_.C00E: Found 2 idle states
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
ACPI: \_PR_.C001: Found 2 idle states
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
ACPI: \_PR_.C003: Found 2 idle states
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
ACPI: \_PR_.C005: Found 2 idle states
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
ACPI: \_PR_.C007: Found 2 idle states
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
ACPI: \_PR_.C009: Found 2 idle states
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
ACPI: \_PR_.C00B: Found 2 idle states
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
ACPI: \_PR_.C00D: Found 2 idle states
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
ACPI: \_PR_.C00F: Found 2 idle states
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ahci 0000:03:00.1: version 3.0
ahci 0000:03:00.1: SSS flag set, parallel bus scan disabled
ahci 0000:03:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0xff impl SATA mode
ahci 0000:03:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
ata1: SATA max UDMA/133 abar m131072@0xf7780000 port 0xf7780100 irq 42
ata2: SATA max UDMA/133 abar m131072@0xf7780000 port 0xf7780180 irq 42
ata3: SATA max UDMA/133 abar m131072@0xf7780000 port 0xf7780200 irq 42
ata4: SATA max UDMA/133 abar m131072@0xf7780000 port 0xf7780280 irq 42
ata5: SATA max UDMA/133 abar m131072@0xf7780000 port 0xf7780300 irq 42
ata6: SATA max UDMA/133 abar m131072@0xf7780000 port 0xf7780380 irq 42
ata7: SATA max UDMA/133 abar m131072@0xf7780000 port 0xf7780400 irq 42
ata8: SATA max UDMA/133 abar m131072@0xf7780000 port 0xf7780480 irq 42
ahci 0000:29:00.2: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:29:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
scsi host8: ahci
ata9: SATA max UDMA/133 abar m4096@0xf7808000 port 0xf7808100 irq 44
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:03:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000410
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 5.8.13-200.fc32.x86_64 xhci-hcd
usb usb1: SerialNumber: 0000:03:00.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 14 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:03:00.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.08
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.8.13-200.fc32.x86_64 xhci-hcd
usb usb2: SerialNumber: 0000:03:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
xhci_hcd 0000:26:00.0: xHCI Host Controller
xhci_hcd 0000:26:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:26:00.0: hcc params 0x0200eec0 hci version 0x110 quirks 0x0000000000800010
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 5.8.13-200.fc32.x86_64 xhci-hcd
usb usb3: SerialNumber: 0000:26:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:26:00.0: xHCI Host Controller
xhci_hcd 0000:26:00.0: new USB bus registered, assigned bus number 4
xhci_hcd 0000:26:00.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.08
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 5.8.13-200.fc32.x86_64 xhci-hcd
usb usb4: SerialNumber: 0000:26:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
xhci_hcd 0000:28:00.3: xHCI Host Controller
xhci_hcd 0000:28:00.3: new USB bus registered, assigned bus number 5
xhci_hcd 0000:28:00.3: hcc params 0x0270f665 hci version 0x100 quirks 0x0000000040000410
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 5.8.13-200.fc32.x86_64 xhci-hcd
usb usb5: SerialNumber: 0000:28:00.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 4 ports detected
xhci_hcd 0000:28:00.3: xHCI Host Controller
xhci_hcd 0000:28:00.3: new USB bus registered, assigned bus number 6
xhci_hcd 0000:28:00.3: Host supports USB 3.0 SuperSpeed
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.08
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 5.8.13-200.fc32.x86_64 xhci-hcd
usb usb6: SerialNumber: 0000:28:00.3
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
usbcore: registered new interface driver usbserial_generic
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: registered as rtc0
rtc_cmos 00:01: setting system clock to 2020-10-08T08:30:50 UTC (1602145850)
rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com
hid: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
Initializing XFRM netlink socket
NET: Registered protocol family 10
Segment Routing with IPv6
RPL Segment Routing with IPv6
mip6: Mobile IPv6
NET: Registered protocol family 17
microcode: CPU0: patch_level=0x08001138
microcode: CPU1: patch_level=0x08001138
microcode: CPU2: patch_level=0x08001138
microcode: CPU3: patch_level=0x08001138
microcode: CPU4: patch_level=0x08001138
microcode: CPU5: patch_level=0x08001138
microcode: CPU6: patch_level=0x08001138
microcode: CPU7: patch_level=0x08001138
microcode: CPU8: patch_level=0x08001138
microcode: CPU9: patch_level=0x08001138
microcode: CPU10: patch_level=0x08001138
microcode: CPU11: patch_level=0x08001138
microcode: CPU12: patch_level=0x08001138
microcode: CPU13: patch_level=0x08001138
microcode: CPU14: patch_level=0x08001138
microcode: CPU15: patch_level=0x08001138
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
sched_clock: Marking stable (815805540, -9995980)->(842811643, -37002083)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Fedora kernel signing key: 6c2bab4c0b0bc6e4ec4b6ca1375b66d70343463b'
zswap: loaded using pool lzo/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
Key type fscrypt-provisioning registered
Btrfs loaded, crc32c=crc32c-generic
Key type encrypted registered
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'MSI SHIP OWN CA: c2608d7de57ee78642366ec645b7381c'
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha256
ima: No architecture policies found
PM: Magic number: 8:948:522
RAS: Correctable Errors collector initialized.
ata9: SATA link down (SStatus 0 SControl 300)
usb 1-12: new full-speed USB device number 2 using xhci_hcd
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-8: ADATA SP900, 5.8.2a, max UDMA/133
ata1.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ADATA SP900 2a PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
usb 3-1: new high-speed USB device number 2 using xhci_hcd
usb 3-1: New USB device found, idVendor=0424, idProduct=2504, bcdDevice= 0.01
usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 4 ports detected
usb 1-12: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.10
usb 1-12: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-12: Product: USB Receiver
usb 1-12: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-12/1-12:1.0/0003:046D:C52B.0001/input/input2
hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:03:00.0-12/input0
input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-12/1-12:1.1/0003:046D:C52B.0002/input/input3
input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-12/1-12:1.1/0003:046D:C52B.0002/input/input4
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ATA-8: SSD2SC120G3LA726B087-327, 560ABBF0, max UDMA/133
ata2.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA SSD2SC120G3LA726 BBF0 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/112 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: Attached scsi generic sg1 type 0
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-12/1-12:1.1/0003:046D:C52B.0002/input/input5
hid-generic 0003:046D:C52B.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:03:00.0-12/input1
hid-generic 0003:046D:C52B.0003: hiddev97,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:03:00.0-12/input2
tsc: Refined TSC clocksource calibration: 3400.000 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x31024ec0a0e, max_idle_ns: 440795247338 ns
clocksource: Switched to clocksource tsc
usb 1-13: new full-speed USB device number 3 using xhci_hcd
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3.00: ATA-8: Hitachi HUS724030ALE641, MJ8OA5F0, max UDMA/133
ata3.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA Hitachi HUS72403 A5F0 PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
sd 2:0:0:0: [sdc] 4096-byte physical blocks
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1 sdc2
sd 2:0:0:0: [sdc] Attached SCSI disk
usb 1-13: New USB device found, idVendor=046d, idProduct=c24d, bcdDevice=80.01
usb 1-13: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-13: Product: Logitech G710 Keyboard
usb 1-13: Manufacturer: Logitech
input: Logitech Logitech G710 Keyboard as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-13/1-13:1.0/0003:046D:C24D.0004/input/input7
hid-generic 0003:046D:C24D.0004: input,hidraw3: USB HID v1.11 Keyboard [Logitech Logitech G710 Keyboard] on usb-0000:03:00.0-13/input0
input: Logitech Logitech G710 Keyboard as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-13/1-13:1.1/0003:046D:C24D.0005/input/input8
input: Logitech Logitech G710 Keyboard Consumer Control as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-13/1-13:1.1/0003:046D:C24D.0005/input/input9
hid-generic 0003:046D:C24D.0005: input,hiddev98,hidraw4: USB HID v1.11 Keyboard [Logitech Logitech G710 Keyboard] on usb-0000:03:00.0-13/input1
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 330)
ata6: SATA link down (SStatus 0 SControl 330)
ata7: SATA link down (SStatus 0 SControl 330)
ata8: SATA link down (SStatus 0 SControl 330)
Freeing unused decrypted memory: 2040K
Freeing unused kernel image (initmem) memory: 2504K
Write protecting the kernel read-only data: 26624k
Freeing unused kernel image (text/rodata gap) memory: 2044K
Freeing unused kernel image (rodata/data gap) memory: 1616K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
rodata_test: all tests were successful
Run /init as init process
with arguments:
/init
rhgb
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=(hd3,gpt2)/vmlinuz-5.8.13-200.fc32.x86_64
systemd[1]: systemd v245.8-2.fc32 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
systemd[1]: Reached target Local File Systems.
systemd[1]: Reached target Slices.
systemd[1]: Reached target Swap.
systemd[1]: Reached target Timers.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Reached target Sockets.
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Started Hardware RNG Entropy Gatherer Daemon.
systemd[1]: Starting Journal Service...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Finished Create list of static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Finished Create Static Device Nodes in /dev.
systemd[1]: Finished Setup Virtual Console.
audit: type=1130 audit(1602145853.504:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: Condition check resulted in dracut ask for additional cmdline parameters being skipped.
systemd[1]: Starting dracut cmdline hook...
fuse: init (API version 7.31)
i2c /dev entries driver
systemd[1]: Finished Load Kernel Modules.
audit: type=1130 audit(1602145853.511:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Started Journal Service.
audit: type=1130 audit(1602145853.512:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1602145853.518:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1602145853.520:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1602145853.554:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1602145853.573:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1334 audit(1602145853.574:9): prog-id=6 op=LOAD
audit: type=1334 audit(1602145853.574:10): prog-id=7 op=LOAD
acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
nvme nvme0: pci function 0000:01:00.0
r8169 0000:22:00.0: enabling device (0000 -> 0003)
ccp 0000:28:00.2: enabling device (0000 -> 0002)
ccp 0000:28:00.2: ccp enabled
nvme nvme0: missing or invalid SUBNQN field.
nvme nvme0: Shutdown timeout set to 8 seconds
libphy: r8169: probed
r8169 0000:22:00.0 eth0: RTL8168h/8111h, 2c:f0:5d:07:ca:ec, XID 541, IRQ 54
r8169 0000:22:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
r8169 0000:22:00.0 enp34s0: renamed from eth0
nvme nvme0: 32/0/0 default/read/poll queues
nvme0n1: p1 p2 p3
logitech-djreceiver 0003:046D:C52B.0003: hiddev96,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:03:00.0-12/input2
input: Logitech Wireless Device PID:1020 Mouse as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-12/1-12:1.2/0003:046D:C52B.0003/0003:046D:1020.0006/input/input11
hid-generic 0003:046D:1020.0006: input,hidraw1: USB HID v1.11 Mouse [Logitech Wireless Device PID:1020] on usb-0000:03:00.0-12/input2:1
input: Logitech Wireless Device PID:4004 Keyboard as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-12/1-12:1.2/0003:046D:C52B.0003/0003:046D:4004.0007/input/input15
input: Logitech Wireless Device PID:4004 Consumer Control as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-12/1-12:1.2/0003:046D:C52B.0003/0003:046D:4004.0007/input/input16
input: Logitech Wireless Device PID:4004 System Control as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-12/1-12:1.2/0003:046D:C52B.0003/0003:046D:4004.0007/input/input17
hid-generic 0003:046D:4004.0007: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Device PID:4004] on usb-0000:03:00.0-12/input2:2
input: Logitech Wireless Device PID:1025 Mouse as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-12/1-12:1.2/0003:046D:C52B.0003/0003:046D:1025.0008/input/input21
hid-generic 0003:046D:1025.0008: input,hidraw5: USB HID v1.11 Mouse [Logitech Wireless Device PID:1025] on usb-0000:03:00.0-12/input2:3
input: Logitech Wireless Device PID:101b Mouse as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-12/1-12:1.2/0003:046D:C52B.0003/0003:046D:101B.0009/input/input25
hid-generic 0003:046D:101B.0009: input,hidraw6: USB HID v1.11 Mouse [Logitech Wireless Device PID:101b] on usb-0000:03:00.0-12/input2:4
input: Logitech M215 as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-12/1-12:1.2/0003:046D:C52B.0003/0003:046D:1020.0006/input/input29
logitech-hidpp-device 0003:046D:1020.0006: input,hidraw1: USB HID v1.11 Mouse [Logitech M215] on usb-0000:03:00.0-12/input2:1
input: Logitech K360 as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-12/1-12:1.2/0003:046D:C52B.0003/0003:046D:4004.0007/input/input30
logitech-hidpp-device 0003:046D:4004.0007: input,hidraw2: USB HID v1.11 Keyboard [Logitech K360] on usb-0000:03:00.0-12/input2:2
input: Logitech M510 as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-12/1-12:1.2/0003:046D:C52B.0003/0003:046D:1025.0008/input/input31
logitech-hidpp-device 0003:046D:1025.0008: input,hidraw5: USB HID v1.11 Mouse [Logitech M510] on usb-0000:03:00.0-12/input2:3
input: Logitech M705 as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-12/1-12:1.2/0003:046D:C52B.0003/0003:046D:101B.0009/input/input32
logitech-hidpp-device 0003:046D:101B.0009: input,hidraw6: USB HID v1.11 Mouse [Logitech M705] on usb-0000:03:00.0-12/input2:4
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
systemd-journald[318]: Received SIGTERM from PID 1 (systemd).
SELinux: Permission watch in class filesystem not defined in policy.
SELinux: Permission watch in class file not defined in policy.
SELinux: Permission watch_mount in class file not defined in policy.
SELinux: Permission watch_sb in class file not defined in policy.
SELinux: Permission watch_with_perm in class file not defined in policy.
SELinux: Permission watch_reads in class file not defined in policy.
SELinux: Permission watch in class dir not defined in policy.
SELinux: Permission watch_mount in class dir not defined in policy.
SELinux: Permission watch_sb in class dir not defined in policy.
SELinux: Permission watch_with_perm in class dir not defined in policy.
SELinux: Permission watch_reads in class dir not defined in policy.
SELinux: Permission watch in class lnk_file not defined in policy.
SELinux: Permission watch_mount in class lnk_file not defined in policy.
SELinux: Permission watch_sb in class lnk_file not defined in policy.
SELinux: Permission watch_with_perm in class lnk_file not defined in policy.
SELinux: Permission watch_reads in class lnk_file not defined in policy.
SELinux: Permission watch in class chr_file not defined in policy.
SELinux: Permission watch_mount in class chr_file not defined in policy.
SELinux: Permission watch_sb in class chr_file not defined in policy.
SELinux: Permission watch_with_perm in class chr_file not defined in policy.
SELinux: Permission watch_reads in class chr_file not defined in policy.
SELinux: Permission watch in class blk_file not defined in policy.
SELinux: Permission watch_mount in class blk_file not defined in policy.
SELinux: Permission watch_sb in class blk_file not defined in policy.
SELinux: Permission watch_with_perm in class blk_file not defined in policy.
SELinux: Permission watch_reads in class blk_file not defined in policy.
SELinux: Permission watch in class sock_file not defined in policy.
SELinux: Permission watch_mount in class sock_file not defined in policy.
SELinux: Permission watch_sb in class sock_file not defined in policy.
SELinux: Permission watch_with_perm in class sock_file not defined in policy.
SELinux: Permission watch_reads in class sock_file not defined in policy.
SELinux: Permission watch in class fifo_file not defined in policy.
SELinux: Permission watch_mount in class fifo_file not defined in policy.
SELinux: Permission watch_sb in class fifo_file not defined in policy.
SELinux: Permission watch_with_perm in class fifo_file not defined in policy.
SELinux: Permission watch_reads in class fifo_file not defined in policy.
SELinux: Permission perfmon in class capability2 not defined in policy.
SELinux: Permission bpf in class capability2 not defined in policy.
SELinux: Permission perfmon in class cap2_userns not defined in policy.
SELinux: Permission bpf in class cap2_userns not defined in policy.
SELinux: Class perf_event not defined in policy.
SELinux: Class lockdown not defined in policy.
SELinux: the above unknown classes and permissions will be allowed
SELinux: policy capability network_peer_controls=1
SELinux: policy capability open_perms=1
SELinux: policy capability extended_socket_class=1
SELinux: policy capability always_check_network=0
SELinux: policy capability cgroup_seclabel=1
SELinux: policy capability nnp_nosuid_transition=1
SELinux: policy capability genfs_seclabel_symlinks=0
kauditd_printk_skb: 41 callbacks suppressed
audit: type=1403 audit(1602145854.908:52): auid=4294967295 ses=4294967295 lsm=selinux res=1
systemd[1]: Successfully loaded SELinux policy in 98.666ms.
systemd[1]: RTC configured in localtime, applying delta of -240 minutes to system time.
systemd[1]: Relabelled /dev, /dev/shm, /run, /sys/fs/cgroup in 25.596ms.
systemd[1]: systemd v245.8-2.fc32 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
audit: type=1334 audit(1602160254.972:53): prog-id=13 op=LOAD
audit: type=1334 audit(1602160254.972:54): prog-id=13 op=UNLOAD
audit: type=1334 audit(1602160254.972:55): prog-id=14 op=LOAD
audit: type=1334 audit(1602160254.972:56): prog-id=14 op=UNLOAD
audit: type=1334 audit(1602160255.120:57): prog-id=15 op=LOAD
audit: type=1334 audit(1602160255.120:58): prog-id=16 op=LOAD
audit: type=1334 audit(1602160255.120:59): prog-id=17 op=LOAD
audit: type=1131 audit(1602160255.121:60): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: initrd-switch-root.service: Succeeded.
systemd[1]: Stopped Switch Root.
audit: type=1130 audit(1602160255.122:61): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=initrd-switch-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
systemd[1]: Created slice Virtual Machine and Container Slice.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target Login Prompts.
systemd[1]: Stopped target Switch Root.
systemd[1]: Stopped target Initrd File Systems.
systemd[1]: Stopped target Initrd Root File System.
systemd[1]: Reached target Slices.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on multipathd control socket.
systemd[1]: Listening on Process Core Dump Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on User Database Manager Socket.
systemd[1]: Activating swap /dev/mapper/fedora_localhost--live-swap...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Starting Preprocess NFS configuration convertion...
systemd[1]: plymouth-switch-root.service: Succeeded.
systemd[1]: Stopped Plymouth switch root service.
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: Stopped Journal Service.
systemd[1]: Starting Journal Service...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Repartition Root Disk...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: sysroot.mount: Succeeded.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Create list of static device nodes for the current kernel.
systemd[1]: nfs-convert.service: Succeeded.
systemd[1]: Finished Preprocess NFS configuration convertion.
systemd[1]: Finished Load Kernel Modules.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Finished Repartition Root Disk.
systemd[1]: Mounted FUSE Control File System.
Adding 8265724k swap on /dev/mapper/fedora_localhost--live-swap. Priority:-2 extents:1 across:8265724k SSFS
EXT4-fs (dm-0): re-mounted. Opts: (null)
systemd[1]: Activated swap /dev/mapper/fedora_localhost--live-swap.
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Reached target Swap.
systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
systemd[1]: Mounting Temporary Directory (/tmp)...
systemd[1]: Condition check resulted in OSTree Remount OS/ Bind Mounts being skipped.
systemd[1]: Condition check resulted in First Boot Wizard being skipped.
systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Condition check resulted in Create System Users being skipped.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Finished Apply Kernel Variables.
systemd[1]: Mounted Temporary Directory (/tmp).
systemd[1]: Started Journal Service.
systemd-journald[685]: Received client request to flush runtime journal.
acpi_cpufreq: overriding BIOS provided _PSD data
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
input: PC Speaker as /devices/platform/pcspkr/input/input33
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
sp5100-tco sp5100-tco: Watchdog hardware is disabled
RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain package 2^-16 Joules
kvm: Nested Virtualization enabled
SVM: kvm: Nested Paging enabled
SVM: Virtual VMLOAD VMSAVE supported
SVM: Virtual GIF supported
MCE: In-kernel MCE decoding enabled.
EDAC amd64: F17h detected (node 0).
EDAC amd64: Node 0: DRAM ECC disabled.
snd_hda_intel 0000:27:00.1: enabling device (0000 -> 0002)
snd_hda_intel 0000:27:00.1: Disabling MSI
snd_hda_intel 0000:27:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:29:00.3: enabling device (0000 -> 0002)
EDAC amd64: F17h detected (node 0).
EDAC amd64: Node 0: DRAM ECC disabled.
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:27:00.1/sound/card0/input34
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:27:00.1/sound/card0/input35
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:27:00.1/sound/card0/input36
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:27:00.1/sound/card0/input37
input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.1/0000:27:00.1/sound/card0/input38
input: HDA NVidia HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.1/0000:27:00.1/sound/card0/input39
input: HDA NVidia HDMI/DP,pcm=12 as /devices/pci0000:00/0000:00:03.1/0000:27:00.1/sound/card0/input40
EDAC amd64: F17h detected (node 0).
EDAC amd64: Node 0: DRAM ECC disabled.
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC1D0: inputs:
snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:29:00.3/sound/card1/input41
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:29:00.3/sound/card1/input42
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:29:00.3/sound/card1/input43
input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:29:00.3/sound/card1/input44
input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:29:00.3/sound/card1/input45
input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:29:00.3/sound/card1/input46
input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:29:00.3/sound/card1/input47
EDAC amd64: F17h detected (node 0).
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: F17h detected (node 0).
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: F17h detected (node 0).
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: F17h detected (node 0).
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: F17h detected (node 0).
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: F17h detected (node 0).
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: F17h detected (node 0).
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: F17h detected (node 0).
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: F17h detected (node 0).
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: F17h detected (node 0).
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: F17h detected (node 0).
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: F17h detected (node 0).
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: F17h detected (node 0).
EDAC amd64: Node 0: DRAM ECC disabled.
EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
nct6775: Found NCT6795D or compatible chip at 0x4e:0xa20
Generic FE-GE Realtek PHY r8169-2200:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-2200:00, irq=IGNORE)
r8169 0000:22:00.0 enp34s0: Link is Down
r8169 0000:22:00.0 enp34s0: Link is Up - 1Gbps/Full - flow control rx/tx
IPv6: ADDRCONF(NETDEV_CHANGE): enp34s0: link becomes ready
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
tun: Universal TUN/TAP device driver, 1.6
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic entered promiscuous mode
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered listening state
virbr0: port 1(virbr0-nic) entered disabled state
nvidia: loading out-of-tree module taints kernel.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
nvidia-nvlink: Nvlink Core is being initialized, major device number 236
nvidia 0000:27:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 450.66 Wed Aug 12 19:42:48 UTC 2020
nvidia-uvm: Loaded the UVM driver, major device number 234.
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 450.66 Wed Aug 12 19:37:58 UTC 2020
[drm] [nvidia-drm] [GPU ID 0x00002700] Loading driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:27:00.0 on minor 0
EDAC amd64: F17h detected (node 0).
EDAC amd64: Node 0: DRAM ECC disabled.
rfkill: input handler disabled
rfkill: input handler enabled
snd_hda_intel 0000:27:00.1: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
rfkill: input handler disabled
logitech-hidpp-device 0003:046D:101B.0009: HID++ 1.0 device connected.
EDAC amd64: F17h detected (node 0).
EDAC amd64: Node 0: DRAM ECC disabled.
nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead.
Rounding down aligned max_sectors from 4294967295 to 4294967288
db_root: cannot open: /etc/target
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (iser)
RPC: Registered rdma transport module.
RPC: Registered rdma backchannel transport module.
perf: interrupt took too long (2502 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
perf: interrupt took too long (3132 > 3127), lowering kernel.perf_event_max_sample_rate to 63000
usb 3-1: USB disconnect, device number 2
perf: interrupt took too long (3949 > 3915), lowering kernel.perf_event_max_sample_rate to 50000
perf: interrupt took too long (4945 > 4936), lowering kernel.perf_event_max_sample_rate to 40000
usb 3-1: new high-speed USB device number 3 using xhci_hcd
usb 3-1: New USB device found, idVendor=0424, idProduct=2504, bcdDevice= 0.01
usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 4 ports detected
usb 3-1: USB disconnect, device number 3